Products

  • Pipe Line Sight Glass

    Pipe Line Sight Glass

    DN:DN50-DN150 PN:PN1.0MPa/PN1.6MPa Connection type:Welding Body material:CF8、CF8M、CF3M、904L、C4、TA2 Working temperature:-29℃≤T≤80℃  The pipeline sight glass is an accessory installed in the middle of the pipeline, which is convenient for users to observe the flow state of materials in the pipeline. There are many kinds of pipe mirrors, such as pipe through mirror, impeller mirror, swing mirror, float mirror, rotor mirror and so on. The types of pipe mirrors include the above, and mor...
  • Thermodynamic disc type steam trap

    Thermodynamic disc type steam trap

    1. The thermal power type steam trap can work in the whole working range without adjusting or changing the internal parts.
    2. Compact structure, simple, light weight, in terms of its size, large displacement.
    3. Thermal power type steam trap can be used for high pressure and superheated steam, water hammer and vibration resistance, stainless steel structure can resist condensation water corrosion.
    4. The thermal power trap will not be damaged by freezing, but the disc edge is easy to wear when the disc is in the vertical direction and directly discharged into the atmosphere.
    5. Since the disc is the only moving part, it is easy to maintain and there is no need to remove the drain valve from the pipeline.

  • Long stem cryogenic globe valve

    Long stem cryogenic globe valve

    1. Open and close without friction. This function completely solves the problem of traditional valve sealing affected by mutual friction between sealing faces.
    2. Top mounted structure. The valve installed on the pipeline can be directly inspected and maintained, which can effectively reduce the shutdown of the device and reduce the cost.
    3. Single seat design. It eliminates the problem that the medium in the valve chamber affects the safety due to abnormal pressure rise.
    4. Low torque design. The valve stem of special structure design can be opened and closed easily with a small handle valve.
    5. Self cleaning structure of sealing surface. When the ball tilts away from the valve seat, the fluid in the pipeline passes through the sealing surface of the ball in a 360 ° uniform manner, which not only eliminates the local scouring of high-speed fluid on the valve seat, but also washes away the accumulation on the sealing surface, so as to achieve the purpose of self-cleaning.

  • Axial flow check valve

    Axial flow check valve

    Axial flow check valve as know as one-way check valve, the disc is open or close by means of medium flow and force, to prevent backflow of medium.
    Check valves are automatically used one-way flow of media channel, the media only allows flow in one direction in order to prevent accident.

  • Swing check valve

    Swing check valve

    1. The length of the structure is short;
    2. Small size and light weight;
    3. The valve disc closes quickly and the water hammer pressure is small;
    4. Both horizontal and vertical pipes can be used and installed conveniently;
    5. The flow channel is unobstructed and the fluid resistance is small;

  • Foot valve

    Foot valve

    The foot valve, also known as check valve, is a low-pressure flat valve. Its function is to ensure the one-way flow of liquid in the suction pipe and make the pump work normally. When the pump stops working for a short time, the liquid can not return to the water source tank and the suction pipe is full of liquid, which is conducive to the start of the pump

  • JIS foot valve

    JIS foot valve

    The foot valve, also known as check valve, is a low-pressure flat valve. Its function is to ensure the one-way flow of liquid in the suction pipe and make the pump work normally. When the pump stops working for a short time, the liquid can not return to the water source tank and the suction pipe is full of liquid, which is conducive to the start of the pump

    JIS standard

  • Pneumatic Y-shaped angle seat valve

    Pneumatic Y-shaped angle seat valve

    1. Visual position indication;
    2. It is easy to connect;
    3. The pneumatic angle seat valve has many control modes;
    4. Without water hammer, the water hammer (water impact force) is absorbed when the fluid flows from under the valve stem;
    5. Easy to install: pneumatic head can rotate 360 degrees. One or two limit switches can be installed conveniently;
    6. Smaller pneumatic actuator is required: when the fluid flows from the top of the valve stem, a smaller control head can be selected;
    7. Advanced pneumatic controller;
    8. Advanced body mechanism.

  • Sanitary center lined type rubber butterfly valve

    Sanitary center lined type rubber butterfly valve

    Sanitary butterfly valve is a kind of product in sanitary valve. Sanitary butterfly valve adopts standard electronic polishing, with smooth surface to ensure cleanness, no medium accumulation area and no potential pollution. Quick disassembly and assembly of sanitary butterfly valve makes valve opening and maintenance fast and easy, and reduces process downtime. Sanitary butterfly valve is mainly used in food, pharmaceutical, cosmetics, clean steam, alcohol, beverage, biochemical industrial machinery, with compact structure, easy assembly and disassembly and many other excellent features.

  • Double-eccentric butterfly valve

    Double-eccentric butterfly valve

    Double eccentric butterfly valve is also called high performance butterfly valve, which is mainly used for water plant, power plant, steel plant smelting, chemical industry, water source spring engineering, environmental facilities construction and other system drainage, especially suitable for waterway pipeline, as regulating and intercepting equipment. Compared with the center line butterfly valve, the double eccentric butterfly valve is more resistant to high pressure, longer service life and good stability

  • Three-eccentric butterfly valve

    Three-eccentric butterfly valve

    This series of butterfly valves are a new generation of high-performance products developed by engineers of our company. Its performance has been at the advanced level at home and abroad. It is widely used for cutting off or regulating medium flow on industrial pipelines such as low pressure, medium pressure, high pressure, steel, metallurgy, petroleum, chemical, electric power, etc

  • Anti-Dew Butterfly valve

    Anti-Dew Butterfly valve

    The unique design of anti dew butterfly valve enables the valve plate to gradually contact the valve seat during the closing process, which can ensure good sealing performance and reduce unnecessary torque. In addition, the stainless steel butterfly plate and internal parts can prolong the service life of the valve seat and have strong anti rust and corrosion resistance functions. The reduction of torque realizes the lightweight and miniaturization of the driving device. Unique stem seal ring prevents fluid leakage

123456 Next > >> Page 1 / 7